Tech Tips

How to Correctly Point a TV Antenna for Best Reception?


Although it seems simple at first glance, finding the ideal antenna and setting it up can take a long time. This mostly happens to those who do not have enough experience about it or know very little. In order not to have a problem with blurred image and bad sound, try to learn everything about the correct installation of the antenna. Once you learn how the antenna works, which accessory you can use and some other things, you can forget about the uneven image and spotty signal strength. It is also important to take into account the weather conditions, your geographical area, the type of antenna and its potential.

Find the broadcast towers

You need to focus on those towers that are near you. Why is it important? Identifying these towers is important because it will let you know how good a signal you have. So before you buy an antenna, check your environment. That would be an ideal timing, because you will understand what you need so much better. This primarily refers to the power of the antenna, which is determined depending on your needs. For example, if the tower is far from your home, you will definitely need a more powerful antenna to be able to watch all the channels. All you need to do to check the towers is to visit the appropriate websites that will provide you with all the necessary information. Use online tools to find your street and see the distance and direction of the towers in your area based on the map.

Install the antenna in the appropriate place


Whether or not you opt for a good antenna, it won’t make sense if you put it in the wrong place. What is the wrong place? This refers to the places that will contain obstacles between the antenna and the embossing poles. Remember that thick walls and ceilings are also obstacles. It is important to place your antenna near the window or as close to it as possible. This will give you the best results. Avoid places surrounded by trees, but also take care of the sun. You need to turn the white side outwards so that the antenna absorbs as little sun as possible. Also pay attention to the type of antenna. For example, a flat antenna must be placed securely so that it does not bend due to weather conditions that can interfere with signal reception.

Place your antenna on a high place in the house

Keep in mind that height plays a key role in reception, so try to find as much space as possible. Therefore, external antennas have an advantage over internal antennas, because they can pick up a large number of channels. Height will be one of the items you will need to enter in signal search sites. They will ask you to enter an estimate of the height of your antenna. The worst place you can put it is the basement, because then the broadcast towers will be too far away. If you are afraid of higher places or you don’t have ladders and so on, you should seek professional help. In that case, you should check this and find out what professionals can offer you.



The antennas do not “like” the metals in any way, so keep it as far away from it as possible. Such surfaces should not be located near the antenna for a simple reason. Digital signal interference is a problem. So, metals can block your reception. The most common metals that you will encounter in your home are bars on the window, a metal screen against bugs on the window and similar things. They can cause the most problems. We must not forget the metal roof, which can do a lot.

Antenna position testing

Our advice is to try to place the antenna in several different positions before you find the one that suits you best. Of course, it would be ideal for your antenna to work in the first place where you placed it. However, things are not as simple as you thought. You will probably have to test many options to find the one that gives the best results, but be patient. That way, you will use all its potential, and you only need to set aside a little time. What does antenna position testing look like? For example, each time you set it to a position, run a channel scan on the TV. Depending on how many channels you have managed to capture, decide on the ideal position. In the case of a flat antenna, it is recommended to use transparent adhesive tape during scanning.

TV booster


If you have installed the antenna correctly, placed it in a good place and decided on the appropriate model, you have done a great job. Unfortunately, sometimes it won’t be enough that you tried to do all this. For example, this can happen if you live in a rural area, hilly areas and places that can barely reach the signal. In such a situation, you need support or a TV booster. This way you will achieve high quality sound and picture on your TV. There are several different models of amplifiers to choose from depending on the type of antenna. Each of them is placed in a different place, but each has the same function. He will fix all your problems if there are conditions for that.

How do I know which TV booster is right for me? In the end, it’s all a matter of personal choice. However, it would be best to hire experts who will have adequate answers and advice for you. They will be able to assess your situation very quickly and recommend the model that will help you the most. The diagnostic assessment is free, which means that you will not spend money on consultations, but also on wrong choices. Also conduct a mini survey online. So you will see what is available to you, but you will also find many useful reviews. Of course, do not forget about your geographical area.


Antennas may work on a very simple principle, but there are many factors you need to consider when installing it. Each of them can contribute to a better or worse signal. So consider all the important facts related to proper antenna placement.

Related posts

Five Tips for Creating Healthy Sleep Habits

Adrianne Joseph

6 Tips for Finding Reliable Online Pharmacy Services

Alan Goldberg

Sports Betting in Greece – How To Stay Safe